|
Good House Keeping Practice has always been the key to prevent Contamination problems and protect workers' health.
Many operations in the industry involve
the sanding of parts which is one of the
many dust generating jobs involved in the
maintenance of an aircraft. Some of these
functions if not managed properly could
result in situations such as clogging of
sanding discs, reduction of visibility in
work areas, increase labour and workers
cost in cleaning up of parts, equipment
and the production floor
The Central Vacuum Cleaning Concept has
been proven over time to be the most efficent
method of cleaning when Cleaning Efficiency
is Crucial. Improved Cleaning Efficency
refers to:
| > |
Its ability to
remove the quantity of settled dust
from any cleaning surface. Compared
to various methods of cleaning including
portable vacuum leaners, it is the
only method of cleaning which is capable
to removing up to 100% of settled
dirt on any surface.
|
|
|
| > |
Its ability to
allow the cleaner to spend more time
cleaning, not carrying around bulky
portable vacuum cleaner.
|
|
|
| > |
Its ability to discharge the contaminated air generated through filtering and discharging it out of the factory / plant instead of recycling it within the close proximity of the cleaner process. |
So what is a House Keeping Vacuum Cleaning System?
It
is a Central-Located power vacuum unit connected
by a network of tubing to inlets conveniently
located throughout the building.
The Central Unit generates a vacuum which can be used to clean floors, machines, and the air; it can pick up and transport liquid and solid wastes; it can pick-up and transport in-process materials and move them from one building or plant to another; it can remove dangerous, volatile, corrosive and contaminating substances from the air and from manufacturing areas or anywhere they are generated-this is also called a Scavenging Vacuum System; it can pick-up spilled material and route it back to storage for re-use.
In short, anything that can be done with vacuum can be done efficiently with a Central System. And because the system is centralized, it can be accomplished quicker, easier and with greater efficiency than any other means.
|
The information which we require to make an offer: |
|
|
| > |
The Type of Cleaning Process Required? ie; General Cleaning, Pick-up of Product Spillage, etc |
|
|
| > |
General Data of the Products if it is not General Cleaning |
|
|
| > |
The Area to be Cleaned and if Possible a Layout Plan of the Plant with area to be clean and preferred machine location highlighted |
|
|
| > |
The Number of Simultaneous Cleaners Expected at Any One Time or One Area |
|
|
| > |
Any specific preference of the client or classification of the area to be clean |
|
|
 |
|
|
Integration into
Hand Sander provides a convenient
solution to remove dust generated
by such a situation
|
|
 |
|
Central Wet Separator Constructed in Stainless Steel Material for Removal of Liquid Pick-up by the System |
|
 |
|
The Portable Version of Wet Separation |
|
 |
|
|
The convenient
Top-Hats fits over any Standard 55
Gallon Drum to separate debris pick-up
by the system which is not suppose
to go to the Central Collection Point
|
|
|
