Good House Keeping Practice has always been the key to prevent Contamination Problems and protect workers' health especially in a confined area.
The Central Vacuum Cleaning Concept has been proven over times and trials to be the most efficient method of cleaning when Cleaning Efficiency is Crucial. Improve Cleaning Efficiency refer to:
> |
Its ability to remove the quantity of settled dust from any cleaning surface. Compare to various methods of cleaning inclusive of Portable Vacuum Cleaner, it is the only method of cleaning which is capable to removing up to 100% of settled dirt on most surface.
|
|
|
> |
Its ability to allow cleaner to spend more time cleaning, not carrying around bulky portable vacuum cleaner. |
|
|
> |
Its ability to discharge the contaminated air produced through filtering and discharging it out of the factory / plant instead of recycling it within the close proximity of the cleaner or process. |
So what is a House Keeping Vacuum Cleaning System?
It is a Central-Located power vacuum unit connected by a network of tubings to inlets conveniently located throughout the building.
The Central Unit generates a vacuum which can be used to clean floors, machines, and the air; it can pick up and transport liquid and solid wastes; it can pick-up and transport in-process materials and move them from one building or plant to another; it can remove dangerous, volatile, corrosive and contaminating substances from the air and from manufacturing areas or anywhere they are generated-this is also called a Scavenging Vacuum System; it can pick-up spilled material and route it back to storage for re-use.
In short, anything that can be done with vacuum can be done efficiently with a Central System. And because the system is centralized, it can be accomplished quicker, easier and with greater efficiency than any other means.
|
The information which we require to make an offer: |
|
|
> |
The Type of Cleaning Process Required? ie; General Cleaning, Pick-up of Product Spillage, etc |
|
|
> |
General Data of the Products if it is not General Cleaning |
|
|
> |
The Area to be Cleaned and if Possible a Layout Plan of the Plant with area to be clean and preferred machine location highlighted |
|
|
> |
The Number of Simultaneous Cleaners Expected at Any One Time or One Area |
|
|
> |
Any specific preference of the client or classification of the area to be clean |
|
|
 |
|
Typical Accessories for the System |
|
 |
|
Typical Vacuum Inlet Point of the System |
|
 |
|
Typical Arrangement of the Cleaning Hose Attachment |
|
 |
|
The Convenience Top-Hats fits over any Standard 55 Gallon Drum to separate debris pick-up by the system which is not suppose to go to the Central Collection Point |
|
 |
|
The Portable Version of Wet Separation |
|