|
Cleanliness is one of the Most Important attributes that any Modern Research & Development Facility should have. It is only with a Clean Environment that any Potential Risk of Contamination could be contained. Any major finding of research could be repeated with confident that the end result will be repeatable and consistance.
Therefore, in all of such facility the Cleaning Efficiency of an adopted Cleaning Concept is Most important and it is the First Step towards the Success of the Facility.
The Central Vacuum Cleaning Concept has been proven over time and trials to be the most efficient method of cleaning when Cleaning Efficiency is Crucial. Improve Cleaning Efficiency refer to:
| > |
Its
ability to remove the quantity of
settled dust from any cleaning surface.
Compared to various method of cleaning
inclusive of Portable Vacuum Cleaner,
it is the only method of cleaning
which is capable to removing up to
100% of settled dirt on most surface.
|
|
|
| > |
Its ability to allow cleaner to spend more time cleaning, not carrying around bulky portable vacuum cleaner. |
|
|
| > |
Its ability to discharge the contaminated air produced through filtering and discharging it out of building instead of recycling it within the close proximity of the cleaner process.This is the Key to get Rid of Potential Risk of Cross Contamination between Different Laboratory in the Facility.
|
|
|
| > |
The same system that is used to maintain the Overall Cleanliness is used to ensure the same level of Cleanliness is achieved in Office Area or Admin Area in the Facility where Carpet floor is being adopted. |
So what is a House Keeping Vacuum
Cleaning System?
It is a Central-Located power vacuum unit connected by a network of tubings to inlets conveniently located throughout the building.
The Central Unit generates a vacuum which can be used to clean floors, Laboratory Work Top, Equipments and the air; it can pick up and transport liquid and solid wastes; it can pick up and transport in process materials and move them from one building or to another; it can remove dangerous, volatile, corrosive and contaminating substances from the air and from research areas or anywhere they are generated - this is also called a Scavenging Vacuum System; it can pick up spilled materials or chemical.
In short, anything that can be done with a vacuum can be done efficiently with a Central System. And because the system is centralized, cleaning can be accomplished quicker, easier and with greater efficiency than any other means.
|
The information which we require to make an offer: |
|
|
| > |
The Type of Cleaning Process Required? ie; General Cleaning, Pick up of Product Spillage, etc. |
|
|
| > |
General Data of the Products if it is not General Cleaning. |
|
|
| > |
The Area to be Clean and if Possible a Layout Plan of the Plant with area to be clean and perferred furniture location highlighted.
|
|
|
| > |
The Number of Simultaneous Cleaners Expected at any one time or one area. |
|
|
| > |
Any specific perference of the client or classificationof the area to be clean. |
|
|
|
|
Where the System Will Serve? |
|
 |
|
| All Carpeted Floors |
|
 |
|
All Stone Finish Floors |
|
Wet / Dry Pick - up Bins |
|
 |
|
Constructed of Non Rusting Material, the 3 Gallon Capacity Separator only weight under 35 pounds when Full.
|
|
| Typical Completed Point |
|
 |
|
| Installed Wall Point |
|
 |
|
Installed Wall Point serve as a Low Energy Night Light to light up dark corridors or walkways at night |
|
|
